Reset for lpu resource-mode disaccord with mpu This is a normal reset and requires no action.
NUPS PATCHER CRASHES SOFTWARE
The temporary license loaded on the card has expired.ĭuring a software upgrade, an LPU is reset after the system software is loaded. Table 1-2 Reset causes and handling methodsĪ user has reset the card using the command line interface (CLI) or network management system (NMS).Ĭheck whether any user with the reset privilege has reset the card. Reason: Warm reset board for no receiving message in a long timeĪlternatively, run the display reset-reason slot ID command to view reset information of the card in a specified slot. The MPU frame board's reset total 967, detailed information: The MPU frame board has no reset records. The LPU frame board's reset total 1, detailed information: The LPU frame board has no reset records.
Quidway S9706 Terabit Routing Switch uptime is 0 week, 3 days, 18 hours, 31 minu Huawei Versatile Routing Platform Software
If the external power supply system works properly, run the display alarm all command to check whether there are alarms about power modules of the switch.If any of the preceding situations exists, take measures to fix the problem of the external power supply system. Whether the input voltage measured using a multimeter was in the normal range.Whether any power lines were aged out or loose.Whether any high-power device was connected to the network at that time.Whether other devices in the same rack or powered by the same power supply system were powered off.Whether any exceptions were recorded in logs of the UPS (if the switch was powered by a UPS).
NUPS PATCHER CRASHES MANUAL
Whether any manual operations caused the switch to be powered off.Run the display logbuffer command to check the reboot records of the switch and confirm whether a power failure occurred around the reboot time displayed in the command output.